Replace the ink cartridge and close the cover. Open the cover and install the cartridge properly. The cartridge may not be installed properly. The cartridge may not be compatible with this machine. If you want to continue printing without this function, press the Stop/Reset button for at least 5 seconds.īe advised that Canon isn't liable for any malfunction or trouble caused by printing under the ink out condition. The cartridge displays in gray on the printer status monitor - Windows and Canon IJ Printer Utility - Mac ®.The function for detecting the ink level may be disabled since the ink level can't be correctly detected. When this happens, the printer requires service.

Printing is disabled once the ink absorber becomes completely full. Press the Black or Color button to cancel the error and continue printing. This error means the ink absorber is almost full. The machine has a built-in ink absorber to hold ink used during tasks such as print head cleaning. Make sure cartridges are installed in the correct position. Ink cartridge isn't installed in the correct position. Open the cover and make sure the cartridges are installed properly and are compatible with the machine. The ink cartridge isn't installed properly, or isn't compatible with the machine. Remove the jam, reload the paper, and press the Black or Color button. If printing doesn't resume, check for a paper jam. Reload the paper correctly, then press the Black or Color button. Table 1: The light flashes repeatedly orange Table 2: The light flashes alternately between green and orange. Table 1: The light flashes repeatedly orange. Note the error code number and way the lights flash, then refer to the appropriate table below for help. When a printer error occurs, an error code displays on the printer screen along with flashing lights.

Canon mp210 printer error code e2